GMV's range of optional extras
GMV's optional products increase the performance of the installation, extend its useful life or adapt it to regulations in rehabilitations.
Soft-stop
The soft-stop is an optional component for the 3010 and 3010 A3 valve groups that allows for a softer stop and a higher level of user comfort.
Soft-starter
The Soft-Starter allows the reduction of starting peaks on the power line and the reduction of mechanical and electronic stress on the generator. It also reduces noise at start-up and extends the useful life of the motor.
Oil heating resistance
The oil heating resistance manages to keep the oil in its optimal working range
in cold weather conditions and thus optimize its performance.
Microleveling
Improves leveling accuracy to the cabin. Recommended for forklifts, car lifts, stretcher lifts and residential installations with more than 8 people.
Pawl Device
It is a safety device that prevents the cabin from lowering during loading/unloading operations.
Overload pressure switch
We have NO/NC or both overload pressure switches.
Hand pump
The hand pump is necessary to move the cabin upwards.
Cabin position indicator
It makes it easy to control from
the engine room, if the cabin is located in an unlocking zone.
Applications
- Soft-starter
- Soft-stop
- Oil heating resistance
- Microleveling
- Cabin position indicator
- Pressure switch
- Pawl device
| Soft-starter GMV | |
|---|---|
| Image |  |
| Model | RSLT |
| Engines | Centrales GMV motor DRY |
| Power Supply Voltage | 230 / 400 Vac |
| Feeding Frequency | 50 - 60 Hz |
| Working Temperature | 0 ÷ 40ºC |
| Working altitude | 1000 |
| Protection | IP20 |
| Weight | 400 - 460 g |
| Initial starting voltage | Self regulation |
| Boot time | |
| Alarm | Visual via LED |
| Feeding | Same power supply as engine |
| Certificates | 95/16/EC; 2004/108/EC |
| Dimensions (mm) | 45 x 81 x 105 |