The GLT Omega Evo Classic electric lift is the best choice when cabin size is a priority. 2:1 traction, with a load capacity of 350 to 630 kg. Iron side counterweight. Ideal for reinforced concrete shafts or metal structures.
Solutions >
- Electric elevator
GLT Omega Evo extra Slim electric lift
- Reduction of the space occupied by the lifting system (mechanical on the counterweight side) reduced to 220 mm, allowing for a 10% larger cabin.
- Optimal use of the space is possible by using 3AT and 4AO doors.
- High quality and safety.
- Comfort and energy efficiency.
- Spare parts readily available.
- Low installation cost.
- Trusted maintenance service.
- Possibility of warranty extension up to 10 years.
Technical information
| GLT Features | |||
|---|---|---|---|
| Drive | Electric | ||
| Machine | Gearless | ||
| Description | • MRL elevator, without machine room, with machine high up fixed to the guides with ring chassis (with return pulleys at the bottom) for single access and double opposite access. • 2:1 traction. • Smart and Classic: Nominal load 350 – 450 – 630 - 900 - 1000 kg • Extra Slim: Nominal load 350 – 450 – 630 kg. • 120 mm diameter traction pulley. Use of 6.5 mm diameter polyurethane coated traction cables. • With counterweight located next to the cabin guide with the counterweight pulley off-centre (for capacities up to 630 kg) or centred (for capacities of 900 and 1000 kg) and placed on the same axis of symmetry than those of the cabin (patented by GMV). |
||
| Speed | 1 m/s | ||
| No. of stops | 2 ÷ 12 | ||
| Cabin travel (m) | 3 ÷ 33 | ||
| Intended use | Residential, offices, hotels, hospitals, public and private buildings. | ||
| In accordance with directives and standards |
• Lift Directive 2014/33/EU. • Electromagnetic compatibility directive 2016/30/EU. • Harmonized standard: EN 81.20/50:2014 (Safety rule for lifts) EN 81.28:2016 (Remote alarms for lifts) EN 81.70:2005 EN 81.21:2018 EN 81.73:2016 (behaviour of lifts in case of fire) EN 81.72 (fire-fighting lifts) with VVFF control |
||
| Components security |
• Bidirectional progressive parachute. • A3 speed limiter with anti-drift cabin parking on landing. |
||
| Electrical part | • Control panel located above the door on the top floor. • Control panel with variable frequency VVVF system. • Universal APB maneuver, collective descent maneuver, collective exit maneuver, descent, special hospital maneuver (type U36), firefighting, rescue, reserved use. • Pre-wired power line, series connection with the cabin. • Gap information by encoder. • Management of 1/2 entrances opening alternate, contemporary or selective doors • Automatic return to the landing in the event of a power failure with UPS and reopening of doors. • Communication system according to EN 81.28 standard. • GSM interface (optional). |
||
| Counterweight | • Smart and Classic: Lateral counterweight with concrete blocks. • Extra Slim: Iron side counterweight. |
||
| Type of gap | Reinforced concrete / Metal structure. | ||
| Minimum escape (mm) | IN 81.20 | with standard TMC cabin | 3400 |
| with reduced TMC cabin | 3200 | ||
| EN 81.21 | with standard TMC cabin | 3400 | |
| with reduced TMC cabin | 2600 | ||
| with variable cabin | 2500 | ||
| Minimum pit (mm) | IN 81.20 | with standard TMC cabin | 1000 |
| EN 81.21 | with reduced TMC cabin | 480 | |
| with variable cabin | 450 | ||
| Conforms to EN 81.21, available only for Smart and Classic versions. Not for Extra Slim versions. | |||
| GLT Extra Slim | Nominal load (Kg) | Number of people | Cabin dimensions (mm) | No. entries | Door opening (mm) | Minimum dimensions of opening with side-opening door (mm) | ||
|---|---|---|---|---|---|---|---|---|
| 3AT door dimensions | A | B | PL | C | D | |||
| 350 | 4 | 800** | 1200** | 1 | 750 | 1250 | 1600 | |
| 2 opposite |
750 | 1250 | 1800 | |||||
| 450 | 6 | 950** | 1300** | 1 | 800/850/900 | 1350/1400/1450 | 1700 | |
| 2 opposite |
800/850/900 | 1350/1400/1450 | 1900 | |||||
| 1000* | 1250* | 1 | 800/850/900 | 1400/1400/1450 | 1650 | |||
| 2 opposite |
800/850/900 | 1400/1400/1450 | 1850 | |||||
| 1000* | 1300* | 1 | 800/850/900 | 1400/1400/1450 | 1700 | |||
| 2 opposite |
800/850/900 | 1400/1400/1450 | 1900 | |||||
| 630 | 8 | 1100* | 1400* | 1 | 900 | 1500 | 1750/1800 | |
| 2 opposite |
900 | 1500 | 1940/2000 | |||||
| 900 | 12 | 1400* | 1500* | 1 | 900/1000 | 1850 | 1850 | |
| 2 opposite |
900/1000 | 1850 | 2040 | |||||
| 1000 | 13 | 1100* | 2110* | 1 | - | 1550/1600 | 2500 | |
| 2 opposite |
- | 1550/1600 | 2710 | |||||
| Non-contractual information subject to the conditions of the shaft. The shaft dimensions refer to lead shafts. The measurements indicated in the table are indicative. For any feasibility study, please contact the GMV sales office. The minimum shaft width for lifts complying with EN 81.21 may vary slightly from the standard indicated in the table. The cabin measurements indicated in the table with the symbol (*) comply with both EN 81.70 and Law 13/89; those indicated with the symbol (**) comply with Law 13/89. | ||||||||