Solutions >

LPG freight elevator

The GPL elevator belongs to the acronym Good Passenger Lift, the 1:1 freight elevator built with a strong and long-lasting cabin.

  • GPL complies with EN 81.20.
  • Low weight reduces the size of the piston and motor/pump assembly.
  • 1:1 traction that allows greater stability during loading and unloading as there is no elongation of the ropes.

Technical information

Characteristics
GPL and GPL VL
Cabin Doors
Dimensions Length 1200-4350 mm Depth up to 6700 mm Height 2000-3900 mm Length up to 4000 mm Height up to 3900 mm
Operator - Controlled by VVVF
Floor RAL 7004 checkered painted steel
Walls Magnelis (smart sin) 2,4 or 6 with central opening
Ceiling Magnelis painted RAL 9003 Reinforced
Other finishes - Epoxy painted sheet RAL 7032 Aluminum
Bumper Double in wood or rubber -
Threshold Reinforced aluminum for standard models and solid steel for apots models for use with the electric forklift (F) -
Lightning Recessed LED panels -
Observations See alternatives in the catalogue See alternatives in the catalogue
Protection - Electronic barrier
Chassis FHL and Guide : The chassis design allows for maximum use of the space in the cab, allowing for very wide cabin dimensions.
Standard guide fixings with cylinders fixed to the walls of the shaft.
Robust and lightweight design for quick installation.
-
Pistons EC or 1008 : Telescopic pistons are mechanically synchronized by chains that provide constant synchronization so they do not need to be resynchronized.
The type of piston used allows the dimensions of the hole to be fully exploited.
Direct acting pistons ensure high stability during loading and unloading.
-
Pipes AST : AST pipes have threaded connections. No welding is required at the installation site.
Adjustable threaded connections allow for quick and easy installation.
-
Central Central unit designed for installation in the machine room, allowing for easy maintenance.
3010 valve with soft stop in standard supply and electronic valve as optional.
Star/delta start or soft starter.
Auxiliary motor/pump group for leveling and soft start on the main motor.
Hose between control unit and shut-off valve in AST pipe.
-
Control panel, intercom and push-button panel Universal or collective descent maneuver.
Pre-wired electrical installation to reduce installation time.
Star/delta starter or soft starter.
Auxiliary motor for releveling.
Emergency intercom in accordance with EN 81-28.
Push-button panels in accordance with EN 81-70.
-
Model Load (kg) Cabin* Doors* Gap* No. Pistons
Standard dimensions for LPG forklifts A B PL Type C D
with 1 access
D
with 2 opposite accesses
GPL25 1250-2500 1500 2700 1300 C4 2200 3100 3260 2
GPL25 1250-2500 1800 2700 1400 C4 2500 3100 3260 2
GPL25 1800-3000 2100 2700 1700 C4 2800 3100 3260 2
GPL40 2100-4000 2200 3100 1800 C4 2900 3500 3660 2
GPL40 2250-4000 2200 3400 1800 C4 2900 3800 3960 2
GPL40 3000-5000 2600 3900 2100 C4 3300 4300 4460 2
GPL40 3250-5000 2600 4300 2100 C4 3300 4700 4860 2
GPL80 3250-6000 2600 4300 2100 C4 3300 4700 4860 4
GPL80 4000-8000 2800 4800 2200 C4 3500 5200 5360 4
GPL80 4500-8500 2800 5300 2400 C6 3500 5800 6040 4
GPL80 4500-9000 3000 5300 2600 C6 3700 5800 6040 4
GPL80 4700-10000 2800 6000 2400 C6 3500 6500 6740 4
F = suitable for loading and unloading operations with electric forklift
Door type C4 = center opening door with 4 panels - Door type C6 = center opening door with 6 panels
Maximum travel 13.7 m with standard pit depth (1200 mm) and standard headroom (3400 mm).
Higher strokes are possible with increased pit/headroom. Min. pit 1000 mm possible in particular cases and conditions, see technical information. For any test other than STD, please contact GMV technical department.
Maximum LPG speed 0.63 m/s
LPG cabin height 2000-3000 mm
*Dimensions in mm.