
Pit: characteristics and requirements
The lower part of the enclosure, below the level of the last stop, is called the pit. The floor must be smooth and substantially level.

The lower part of the enclosure, below the level of the last stop, is called the pit. The floor must be smooth and substantially level.
Due to the growing interest in the environment and new legislation, biodegradable fluids are becoming increasingly important in the lifting sector. They can be classified into 3 categories according to their base.
Aid from autonomous communities and town councils
Its objective is to improve the energy efficiency of elevators by using the latest technologies and the most advanced energy-saving systems.
To renovate an old elevator or level out spaces that are difficult to access for people with mobility problems, autonomous communities and local councils provide subsidies.
The phenomenon of cavitation occurs when the fluid has difficulty entering (sucking) the pump suction duct, causing the pressure in this duct to drop. If the pressure is lower than the vapor pressure of the fluid itself, this will lead to the formation of bubbles.
Yes, the blog is celebrating its 1st anniversary. It seems like it was yesterday when we published our first post, but time seems to not want to stop, and today we celebrate the 1st anniversary of the Ascensores blog.
We understand Homelift to be any type of small-sized lift or single-family elevator designed to be installed in single-family homes, chalets, etc.
Today, thanks to technology, great advances have been made in the elimination of architectural barriers and facilitating access to buildings where the installation of an elevator was previously impossible.
A new construction decree comes into force that imposes new measures for the construction of housing in the Valencian Community. New residential buildings with a height of more than 4.5 meters (ground floor and two floors) will have to have an elevator if they serve more than four homes.
The Soft-Starter start bases its use on the ease of being controlled, to produce soft starts according to the needs of the elevator.
The connection of the motors used to operate elevators, hoists, lifts, etc., which are the ones that do the “hard work” in the installation, produce unnecessary intensity peaks on a daily basis.
The tank of a hydraulic power station, in itself, is one of the main elements of the hydraulic circuit, since it stores and treats the hydraulic fluid through which energy is transmitted to the different control and command components.
If you need more information or a quote, fill out the form and we will contact you as soon as possible:
Stay up to date with the latest news about homelift by subscribing to our free quarterly newsletter.